Porsche Taycan airbag module reset service — 992959655D
Mail-in assessment and SRS airbag module reset service for Continental module 992959655D. Service is for the customer's existing module; no replacement module is supplied.
Overview
This is a mail-in service for your existing Porsche Taycan SRS airbag control module, part number 992959655D. You post the module only — not the vehicle; it is serviced, checked and returned to you with tracking. It is not the sale of a replacement module.
Compatibility
Porsche documentation identifies 992959655D as an airbag control unit used in Taycan (Y1A). Match the complete part number and confirm suitability before ordering. Exact vehicle configuration and service eligibility require assessment; no blanket fitment is claimed.
Fitment is based on 1 published catalogue reference; it is not confirmation of fitment for your vehicle — match the printed part number before ordering.
What this service covers
- Module assessment
- SRS crash-data reset where supported for the received unit
What it does not cover
- Replacement module
- Vehicle diagnosis or wiring and sensor repairs
- Coding or configuration work in the vehicle
How the mail-in service works
- Confirm the part number on your module matches this page (send a label photo if unsure).
- Remove the module using the manufacturer's procedure and post it to SRS RESET in Campbellfield, Melbourne — module only.
- Typical turnaround is 1–2 business days after we receive the module.
- After the serviced module is correctly refitted, the SRS warning light may clear provided no other SRS faults remain in the vehicle.
Safe removal & refit
- SRS/airbag systems are safety-critical. Follow the vehicle manufacturer's workshop procedure for removal and refitting.
- Isolate vehicle power as specified by the manufacturer and observe the manufacturer-specified depower waiting period before working on SRS components.
- Do not probe, bridge, bypass, trigger or emulate SRS circuits or components. If you are unsure of the correct procedure, use a qualified technician.
- Removal and refitting should be performed by a suitably qualified technician following the vehicle manufacturer's procedures.
After installation
- Reconnect and refit the module correctly, then scan the SRS/vehicle system.
- Any remaining faults in airbags, pretensioners, sensors, wiring, connectors, voltage supply or other vehicle components must be diagnosed and rectified separately.
- Clear fault codes only after the underlying faults have been corrected.
- The vehicle may require diagnostic checks and configuration after refitting. Other restraint-system faults require separate diagnosis.
Turnaround & postage
Typical turnaround is 1–2 business days after we receive the module. Return postage is included for Australian addresses unless the listing says otherwise. Use a tracked service.
Confirm before ordering
The number printed on your original module is the primary compatibility check. Message us a clear photo of the complete module label, including the printed part number and any visible reference codes, and we will compare the available evidence before confirming support.
Notes
The bulletin's B200000 pedestrian-protection fault requires professional diagnosis; this service is not advertised as a substitute for Porsche's specified component replacement.
Returns & support
Returns and support are handled under the policies shown on the listing and applicable Australian Consumer Law.
Frequently asked questions
Which Porsche Taycan vehicles does airbag module 992959655D fit?
Porsche documentation identifies 992959655D as an airbag control unit used in Taycan (Y1A). Match the complete part number and confirm suitability before ordering. Exact vehicle configuration and service eligibility require assessment; no blanket fitment is claimed.
What generation and years is 992959655D associated with?
Published references associate 992959655D with the Porsche Taycan Taycan (Y1A) (commonly associated with this part number). Fitment is based on 1 published catalogue reference; it is not confirmation of fitment for your vehicle — match the printed part number before ordering.
What label codes appear on module 992959655D?
Reference codes observed on the genuine module label: Airbag VW32, 03, H15, 3303. The printed part number 992959655D is the primary check.
How does the mail-in reset service for 992959655D work?
1. Confirm the part number on your module matches this page (send a label photo if unsure). 2. Remove the module using the manufacturer's procedure and post it to SRS RESET in Campbellfield, Melbourne — module only. 3. Typical turnaround is 1–2 business days after we receive the module. 4. After the serviced module is correctly refitted, the SRS warning light may clear provided no other SRS faults remain in the vehicle.
What does the 992959655D airbag module reset service cover?
Module assessment; SRS crash-data reset where supported for the received unit
What is not covered by the 992959655D reset service?
Replacement module; Vehicle diagnosis or wiring and sensor repairs; Coding or configuration work in the vehicle
How long does the 992959655D reset take and how is it posted back?
Typical turnaround is 1–2 business days after we receive the module. Return postage is included for Australian addresses unless the listing says otherwise. Use a tracked service.
How do I make sure 992959655D is the right part number for my Porsche Taycan?
The number printed on your original module is the primary compatibility check. Message us a clear photo of the complete module label, including the printed part number and any visible reference codes, and we will compare the available evidence before confirming support.
Not sure this is your module?
Send a photo of the label on your Porsche Taycan airbag module and we will confirm the part number and quote within the hour.
Browse: Porsche Taycan airbag modules · all Porsche part numbers · all airbag / srs modules · products · every make